We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Analysis software.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Analysis software(Test) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jan 21, 2026～Feb 17, 2026
This ranking is based on the number of page views on our site.

Analysis software Product List

1～30 item / All 91 items

Displayed results
3D optical analysis software 'Ansys Speos'

3D optical analysis software 'Ansys Speos'

Reduce development time! Minimize the effort of inputting and outputting data every time you perform structural design and dimensional tolerance analysis.

"Ansys Speos" is a 3D optical analysis software that enables high-precision appearance validation through physics-based rendering based on measurements of light sources and materials, human eye characteristics, and environmental properties. In addition to accurate illuminance, luminance, and intensity analysis using ray tracing, it also allows for appearance evaluation based on Human Vision, which is grounded in ergonomics. Three packages are available according to the analysis content. 【Features】 ■ Appearance evaluation function "Human Vision" that reproduces human eye sensitivity ■ Shortened development time and reduced costs through simulation acceleration ■ Dedicated functions for camera and LiDAR design, and integration with Ansys Zemax OpticStudio, "Optical Sensor Test" ■ "Ansys Workbench" enables continuous analysis, optimization, and multiphysics capabilities *For more details, please refer to the PDF document or feel free to contact us.

  • Other analyses
  • Other embedded systems (software and hardware)
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Utilizing borehole data with Surfer

Utilizing borehole data with Surfer

Utilizing borehole data in Surfer

If you want to confirm the layering of strata (stratigraphy), age, mineralization layers, etc., the Drillhole layer in Surfer can realistically reproduce your well data as a true 3D display, along with the contents included in the data (e.g., contaminant concentrations, mineralization concentrations, results of quantitative analysis, geophysical characteristics, etc.). It is also possible to display the path of the borehole, data points, and intervals, as well as color-coding based on the values of the data. In the latest version, it has become possible to create contact points within the drill hole based on keywords (such as lithology names) and data queries (such as SWV: seismic-while-drilling and CPT: Cone Penetration Test data). Visualizing subsurface layers has never been easier!

  • drillm_02-ezgif.com-optimize (1).gif
  • drill_59.png
  • Earth Sciences
  • Distance measuring device
  • Other measurement, recording and measuring instruments
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Optimization design of commercial cargo ships utilizing wind power.

Optimization design of commercial cargo ships utilizing wind power.

CAESES was utilized in various instances during the initial design phase of this large-scale project.

This article introduces the parametric design and optimization calculation system for hulls using CAESES. The role of CAESES in this instance is to evaluate design options for hull concepts and initial stages, with the background being a project promoting low-carbon maritime transportation. As part of this project, CAESES has been introduced for the design development of general cargo ships for the Republic of the Marshall Islands. *For more details, you can view the related links. For further information, please feel free to download the PDF or contact us.

  • 6377084019055301812163411.png
  • 6377084029902125191726054.png
  • 6377084035113595312272328.png
  • 6377084043288060894697242.png
  • 6377084059269478563206043.png
  • 6377084103109995782438503.png
  • 6377084123103727553788890.png
  • 6377084128347436793236519.png
  • 6377084159314665567663579.png
  • Software (middle, driver, security, etc.)
  • Other analyses
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shape optimization of the rear wing using sensitivity analysis.

Shape optimization of the rear wing using sensitivity analysis.

The parametric model is created in CAESES, and the adjoint solutions obtained from the commercial CFD tool are mapped to the design variables!

In this case study, we conducted optimization regarding the drag and downforce (negative lift generated by a moving vehicle) of a sports car's rear wing. For this optimization, a parametric model of the rear wing was created using CAESES, and the adjoint solutions obtained from a commercial CFD tool were mapped to the design variables. *For more details, you can view the related links. Please feel free to download the PDF or contact us for more information.*

  • 12-2.png
  • 12-3.png
  • Other analysis software
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Noise reduction of axial fans using CAESES.

Noise reduction of axial fans using CAESES.

CAESES enables rapid evaluation of all ideas in the optimization process!

The design of axial flow fans generally needs to consider not only efficiency but also noise reduction. Reducing noise in axial flow fans is a rather complex and difficult issue when considering details, but there are some simple geometric methods that can lower fan noise in standard blade designs. The parametric modeling and optimization software CAESES provides a modeling toolbox for implementing various types of shapes and methods, automating the generation of blade geometry in simulation-driven optimization loops. This case study introduces improvements in noise levels and overall acoustic characteristics of axial flow fans utilizing CAESES. *For more detailed information, please refer to the related links. For further details, you can download the PDF or feel free to contact us.*

  • 【CAESES】 軸流ファンの騒音低減2.gif
  • 【CAESES】 軸流ファンの騒音低減3.png
  • 【CAESES】 軸流ファンの騒音低減4.gif
  • fan
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
★Novelty Gift★ INTERMOLD 2016

★Novelty Gift★ INTERMOLD 2016

The password is! At the Autodesk booth, in the CAE Solutions corner, say "I saw the Ipros site."

INTERMOLD2016 27th Mold Processing Technology Exhibition ========================================= ■ Date: April 20 (Wednesday) - 23 (Saturday), 2016 ■ Venue: Intex Osaka ■ Booth Number: 6B-601 (within Autodesk booth) ■ Exhibited Products Resin Flow Analysis Software / Autodesk Moldflow Fluid Analysis Software / Autodesk CFD Structural Analysis Software / Autodesk Simulation Mechanical, Autodesk NASTRAN

  • Structural Analysis
  • Thermo-fluid analysis
  • Other analyses
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DapTechnology's Fire Diagnostic Suite

DapTechnology's Fire Diagnostic Suite

The FireDiagnostics suite is analyzer software used in combination with the FireSpy analyzer.

The FireDiagnostics Suite is software used in conjunction with Dap Technology's FireSpy. This software integrates 1394 analysis, simulation, and interface tools for a wide range of applications. In addition to hardware-assisted analyzer tools such as monitors, recorders, generators, commanders, scriptwriters, and Mil1394 signal monitors, this suite also provides a set of software tools designed to integrate FireSpy products into various test applications. The FireDiagnostics Suite is created through an application programming interface (API), and applications for the FireSpy analyzer equipped with interfaces for development environments such as C/C++ and LabVIEW TM on Microsoft Windows OS are highly flexible. By using the API library, you can control all hardware-assisted analyzer tools such as recorders and generators, as well as lower-level 1394 bus functions.

  • others
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Custom buffer manufactured by ADS Biotec, USA.

Custom buffer manufactured by ADS Biotec, USA.

We can manufacture buffers according to your specifications, ranging from a few liters to several hundred liters! cGMP compliant, international shipping available from the USA.

ADS Biotec in the United States also offers custom buffer solutions tailored to meet customer needs. ■ About ADS Biotec ADS Biotec (formerly Transgenomic) has a manufacturing facility for reagents located in Omaha, Nebraska, and has been manufacturing and selling HPLC buffers for nucleic acid analysis for over 20 years. In addition to HPLC buffers, we have a track record of producing custom buffers for our customers. ■ Sales Units We can accommodate orders from several liters to several hundred liters. For orders of 40 liters or more, we sell in bulk sizes. By using ADS Biotec's large-capacity buffers, it is possible to maintain consistent quality from the research stage. ■ Benefits The buffers are pre-adjusted for concentration, so you can use them immediately upon receipt, reducing the time and cost associated with buffer preparation. ■ Quality Control ADS Biotec is ISO13485 certified and complies with cGMP, ensuring thorough quality control in our manufacturing and sales processes.

  • Buffer
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antenna analysis and EMC measures are performed using electromagnetic field analysis software CST Studio.

Antenna analysis and EMC measures are performed using electromagnetic field analysis software CST Studio.

Leave antenna design and analysis solutions, as well as EMC countermeasures, to the world-class electromagnetic field simulator CST Studio Suite!

For those struggling with reducing development costs and lead times in electromechanical design. Would you consider using electromagnetic field simulation to improve efficiency and reduce costs? CST Studio Suite is a high-performance 3D electromagnetic (EM) analysis software package that performs design, analysis, and optimization of components and systems considering electromagnetic fields. It is widely adopted in various fields such as electrical engineering, automotive, and industrial machinery for product development and research, and it is a world-class simulation software that addresses all electromagnetic field issues, from antennas and wireless communication to EMC noise countermeasures. 【Features】 1. A rich lineup of analysis methods from electrostatics to high frequency 2. Excellent operability and a user-friendly interface 3. Comprehensive CAD interface 4. Extensive usage records by companies and research institutions worldwide 5. Support for advanced analysis technologies 6. Advanced technologies enabling fast and large-scale analysis 7. Complete post-processing capabilities For more details, please refer to the related links below.

  • Magnetic field analysis/electromagnetic wave analysis
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to Desktop Structural Analysis Program

Introduction to Desktop Structural Analysis Program

Creating geometry and analysis models, executing analyses, and post-processing, all realized in one software!!

【Features】 ○ A structural analysis solution that combines the pre- and post-processor "Simcenter Femap" with the analysis solver "Simcenter Nastran." ○ The entire process of creating analysis models, performing analyses, and displaying results from shape data created in 3D-CAD is realized in one software on a single PC. ○ High operability. ○ Easy to implement pricing. ◎ For more detailed information, please refer to the catalog or contact us directly.

  • Structural Analysis
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid Analysis Integrated Environment | FINE/Open with OpenLabs

Fluid Analysis Integrated Environment | FINE/Open with OpenLabs

We offer high-quality automatic meshers, support for 128 parallel processing, accelerated calculation algorithms, and customizable modules, all at a low price while including everything as standard!

"FINE/Open with OpenLabs" is a highly automated general-purpose fluid analysis integrated environment that supports unstructured grids. This package includes standard features such as "high-quality automatic mesher HEXPRESS," "128-core parallel computing module," "computation acceleration algorithm CPU Booster," and "customization module OpenLabs." All these features are offered at a very competitive price compared to other solvers. 【Features】 ■ Automatic creation of complete hexahedral meshes with easy settings ■ Standard inclusion of a unique feature that solves fluid fundamental equations at high speed (2 to 10 times faster) (CPU Booster) ■ Capable of 128-core parallel computing in the standard configuration, suitable for large-scale problems ■ No knowledge of programming languages is required. Free customization is possible, including the addition of unique physical models *For more details, please contact us or download the catalog.

  • Other CAD related software
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rincoff March's pinch analysis software

Rincoff March's pinch analysis software

Achieved 10-30% energy savings, CO2 emission reduction, and 20-50% wastewater reduction.

For more details, please refer to the materials and catalog. In the process industry, optimally integrating processes and utility systems is essential for improving profitability. ＝＝＝＝＝ Overview ＝＝＝＝＝ Linhof March (now KBC Process Technology, Energy Services) has applied its unique experience and software to over 1,200 project evaluations for more than 400 customers in 40 countries, typically achieving energy savings and CO2 emission reductions of 10-30% and wastewater reductions of 20-50%. ＝＝＝＝＝ Features ＝＝＝＝＝ It also greatly contributes to increased production effects and significant reductions in equipment costs during new installations and expansions.

  • Other analyses
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"SimLipid" lipid structure analysis software

"SimLipid" lipid structure analysis software

Software tool for lipidomics using mass spectrometry data of lipids.

High-throughput identification and quantification of lipid species can be performed from MS data such as LC-, MALDI-, ESI-, precursor ion scans, and neutral loss scans. We support all data types from major mass spectrometry manufacturers, including Triple Quad, qTOF, TOF, QqTOF, ion mobility, and ITMS systems, aiming to provide a complete solution for discovery lipidomics and targeted lipidomics research.

  • Separation device
  • Analytical Equipment and Devices
  • Other environmental analysis equipment
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermal Fluid Analysis Software 'FlowDesigner' <Inverse Analysis Function>

Thermal Fluid Analysis Software 'FlowDesigner' <Inverse Analysis Function>

You can instantly see where the problem lies! You are asked to identify "where the conditions that need improvement are" in a "reverse" manner.

"FlowDesigner" is a thermal fluid analysis software that boasts exceptional stability and overwhelming speed, allowing for easy operation with an intuitive interface. The product's "inverse analysis function" provides answers on how to achieve design goals within a limited design review period. By inputting the desired design target values, you can "reverse" the inquiry to determine "where improvements should be made" from the initial design proposal. 【Features of the Inverse Analysis Function】 ■ Identify improvement points with just two simulations 　・Step 1: Conduct analysis of the initial design proposal 　・Step 2: Set design target points and target values ■ Understand suitable improvement methods from the sensitivity map ■ Estimate internal heat generation of equipment through inverse analysis *For more details, please refer to the PDF document or feel free to contact us.

  • Thermo-fluid analysis
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"SimGlycan" Glycan & Glycopeptide Structure Analysis Software

"SimGlycan" Glycan & Glycopeptide Structure Analysis Software

Tools for glycomics using mass spectrometry data of glycan chains and glycopeptides.

It automatically reads MS/MS and MSn data obtained from major manufacturers' mass spectrometers to predict glycan structures. Furthermore, it comprehensively supports glycopeptide analysis using LC-MS/MS data. SimGlycan matches the experimentally obtained MS/MS data with its proprietary database and ultimately generates a ranked list of candidate structures.

  • Separation device
  • Analytical Equipment and Devices
  • Other environmental analysis equipment
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection Molding Simulation "Moldex3D"

Injection Molding Simulation "Moldex3D"

Plastic injection molding 3D analysis software! Simulating various aspects.

The 'Moldex3D' that we handle is a three-dimensional analysis software for plastic injection molding developed and sold by CoreTech System. It is capable of simulating various aspects of the injection molding process, including flow, packing, cooling, and warpage analysis. One example of a module is "MCM (Multi-Component Molding)," which allows for molding evaluation combined with materials other than resin. 【Standard Modules】 ■ Flow Analysis ■ Packing Analysis ■ Cooling Analysis ■ Warpage Analysis ■ Multi-Component Molding (MCM) *For more details, please refer to the related links or feel free to contact us.

  • Other CAD related software
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wild Fusion Bioinformatics Comprehensive Catalog

Wild Fusion Bioinformatics Comprehensive Catalog

Featuring desktop analysis software that covers everything from basic genetic analysis tools to next-generation sequencing data analysis tools!

This catalog is a comprehensive introduction to the bioinformatics of World Fusion Co., Ltd., which mainly develops pharmacogenomics-related software and databases. It features a range of analysis technologies, including the desktop analysis software "CLC Genomics Workbench," which covers everything from basic gene analysis tools to next-generation sequencing data analysis tools, as well as "Biomedical Genomics Workbench" and "Metagenome@KIN." [Contents] ■ NGS Data Analysis ■ Metagenome & Metatranscriptome ■ Clinical Sequence Analysis ■ Annotations & Targets ■ Samples & Data Management *For more details, please request the materials or view the PDF data from the download section.

  • Genetic Analysis Software
  • Genome analysis contract
  • Other analysis software
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
General-purpose structural analysis software "ASU/ISTR" for structure, heat transfer, and vibration.

General-purpose structural analysis software "ASU/ISTR" for structure, heat transfer, and vibration.

A dedicated pre/post-processor that supports the practical use of the free solver FrontISTR, capable of large-scale analysis of various engineering problems such as structural, heat transfer, and vibration analysis.

ASU/ISTR has packaged the free general-purpose structural analysis software FrontISTR, developed by FrontISTR Commons (Representative Director: Professor Hiroshi Okuda, The University of Tokyo), into a Windows version with pre- and post-processing capabilities for easy use by anyone. - Covers the main features of FrontISTR - Equipped with a robust automatic solid mesh generation function that supports multi-part models, allowing for immediate analysis setup and execution once CAD data is provided. - The open-source solver can be used commercially at no cost, and license fees do not increase even for large-scale problems. - A basic material database is provided, supporting isotropic and orthotropic materials. - We also offer customization development of pre- and post-processing to fit your unique workflow. - Utilizes our GUI platform ASU/GROOVE, which has over 140 successful implementations. - Our company has members who are part of the FrontISTR solver development team, capable of addressing advanced technical requests, such as adding unique calculation routines to the solver.

  • Structural Analysis
  • Stress Analysis
  • simulator
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lighting and optical analysis software "Lighting Simulator CAD"

Lighting and optical analysis software "Lighting Simulator CAD"

Recommended for first-time lighting and optical analysis! This is a purely domestic simulation software with a reasonable selling price.

A purely domestic lighting optical analysis software with a Japanese interface that can be easily used by developers in non-optical fields. It leverages the strengths of in-house development to achieve low pricing while maintaining high computational accuracy and reliability based on optical theory, making it a cost-effective simulation software.

  • Company：Camerium
  • Price：500,000 yen-1 million yen
  • simulator
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electromagnetic Field Analysis Software 'INTEGRATED'

Electromagnetic Field Analysis Software 'INTEGRATED'

Creation of shape data, physical conditions/mesh creation, examination of results! We have extensive analysis experience.

The "INTEGRATED Electromagnetic Field Analysis Software" combines usability and accuracy, contributing to prototype reduction in a wide range of design scenarios. It can read data created in CAD or create model shapes using the built-in modeler. The user-friendly GUI allows for easy setting of physical conditions, and with a high-precision mesh generator built-in, users can focus on their designs. Powerful post-processing, graph creation tools, and parametric calculation tools enable users to output the desired results without stress. 【Features】 ■ Reads data created in CAD or creates model shapes using the built-in modeler ■ Allows for easy setting of physical conditions with a user-friendly GUI ■ Built-in high-precision mesh generator ■ Users can focus on their designs ■ Users can output desired results without stress *For more details, please refer to the related links or feel free to contact us.

  • Magnetic field analysis/electromagnetic wave analysis
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermographic Analysis Software EasyThermo

Thermographic Analysis Software EasyThermo

Seamlessly save, output, and analyze thermal images and temperature data.

Seamlessly save, output, and analyze thermal images and temperature data quickly captured from FLIR Systems' ThermoVision(TM) A-Series and ThermaCAM(TM) SC640, the global No. 1 in infrared cameras.

  • others
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
『Drug Discovery AI Factory』

『Drug Discovery AI Factory』

Utilizing KIBIT, we extract a large number of unreported target genes and further narrow them down to more reliable targets using our unique analysis method.

KIBIT generates a network that maps the connections between genes related to diseases. In doing so, it also predicts target genes that are not mentioned in the literature regarding their association with the disease. To extract high-probability targets from these target genes, it utilizes an innovative analysis method called "Drug Discovery Best Known Method (DD-BKM)" to narrow down to targets with a high potential for new drug development.

  • others
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Meshman_ParticlePacking Ver.2.3

Meshman_ParticlePacking Ver.2.3

No more calculations needed to determine the initial configuration! Particles can be randomly filled inside any shape!

"Meshman_ParticlePacking Ver.2.3" is an analysis software that allows control of the generation ratio of particles by type, either by particle count or particle volume. It randomly arranges particles of varying sizes within arbitrary shapes for analysis purposes such as Discrete Element Method (DEM). You can choose from three different algorithms for the filling method. The generated particle model can be visualized in 3D along with the outer shape, and there is an option to increase the filling rate by clustering particles and adding more to the gaps. 【Features】 ■ Randomly fill particles within arbitrary shapes ■ Generate three types of particles: spherical, tetrahedral, and linear ■ Multiple types and sizes of particles can be mixed ■ Create models that simulate short fibers with cylinders ■ Outer shape: Supports STL files and PCH files from ADVENTURE projects ■ Particle model: Output in a proprietary text file format *For more details, please refer to the PDF documentation or feel free to contact us.

  • Other CAD related software
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multivariate Statistical Analysis Software [Vector]

Multivariate Statistical Analysis Software [Vector]

Vector is a multivariate statistical analysis software that supports various types of data! It enhances usability and enables data visualization.

"VEKTOR DIREKTOR" is a product that offers ease of use in multivariate statistical analysis software compatible with various types of data and enables data visualization. From data import to prediction and classification, this product allows for effective data analysis through an intuitive workflow. It can execute the analyzed calibration models in real-time, enabling real-time monitoring and the construction of feedback/forward control systems. With comprehensive preprocessing aimed at spectral analysis, it can be comfortably used not only for big data analysis using process parameters but also for chemometrics. By providing only the methods frequently used by customers, it allows for maximizing the use of data with the appropriate tools. 【Features】 ■ Easy data import ■ Effective visualization ■ Comprehensive data preprocessing functions ■ Diverse analysis tools *For more details, please refer to the PDF materials or feel free to contact us.

  • Other analysis software
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Recommended Operating Models for the General-Purpose Acoustic Analysis Software "Adams"

Recommended Operating Models for the General-Purpose Acoustic Analysis Software "Adams"

Simulation of multibody dynamics! Perform nonlinear dynamic analysis in a short time!

"Adams" is a general-purpose acoustic analysis software that enables early design verification at the system level, improving engineering efficiency and reducing product development costs. Engineers can understand the loads and driving forces distributed across various parts of the mechanical mechanism after analyzing the dynamic behavior of movable components. At Applied, we handle the recommended operating model 'CERVO-Grasta Type-IS2WR-Q-IS55', so please feel free to contact us. 【Adams Features】 ■ Achieves early design verification at the system level ■ Improves engineering efficiency and reduces product development costs ■ Equipped with a wide range of analysis functions ■ Optimized for large-scale problems by utilizing high-performance computing environments ■ Executes nonlinear dynamic analysis in a much shorter time compared to the time required for FEA solutions ■ HEXAGON collaboration model *For more details, please refer to the related links or feel free to contact us.

  • 2022-04-11_11h59_32.png
  • 2022-04-11_11h58_40.png
  • 2022-04-11_11h58_49.png
  • 2022-04-11_11h58_53.png
  • 2022-04-11_11h58_57.png
  • 2022-04-11_11h59_07.png
  • 2022-04-11_11h59_12.png
  • 2022-04-11_11h59_18.png
  • 2022-04-11_11h59_23.png
  • Image analysis software
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Research tools for high-stress GaN devices

Research tools for high-stress GaN devices

Research tools for high-stress GaN devices

This explains the theoretical model of GaN multi-quantum wells (MQW) under high stress. It is possible to obtain the following results for GaN device LEDs grown on silicon in arbitrary crystal orientations using the CrossLight device simulator. The tensile stress from the silicon substrate reduces the band gap of the multi-quantum wells (MQW) and results in a longer wavelength. There is a decrease in piezoelectric charges within the multi-quantum wells (MQW). The reduction in internal quantum efficiency (IQE) is caused by the increase in piezoelectric charges at the electron blocking layer (EBL) interface.

  • simulator
  • Analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Analysis software

Related Categories of Analysis software

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.